MaxTech 800 Bedienungsanleitung PDF herunterladen (Seite 18)

866.4.Maxtec www.maxtecinc.com12

6.0 CHANGING THE OXYGEN SENSOR

Turn off analyzer. Disconnect sensor from

sensor cable.

Remove sensor from

sensor port. Dispose of

sensor according to local

guidelines.

7.0 CLEANING AND MAINTENANCE

Store the MaxVenturi at a temperature similar to that of its daily use.

Device Cleaning:

When cleaning or disinfecting the exterior of the MaxVenturi, take appropriate care

to prevent any solution from entering the device. Do not immerse device in ﬂuids.

MaxVenturi external surfaces may be cleaned using a cloth moistened with 65-70%

isopropyl alcohol/water solution or a germicidal wipe.

Oxygen Sensor Cleaning:

• Clean the sensor with a cloth moistened with 65-70% isopropyl alcohol/water

solution.

• Maxtec does not recommend use of spray disinfectants because they can contain

salts which can accumulate in the sensor membrane and impair readings.

• The oxygen sensor is not intended for steam, ethylene oxide or radiation

sterilization.

Note: For new sensor installation, follow procedure for new sensor installation in

section 2.1.

1 2 ... 13 14 15 16 17 18 19 20 21

Keine Kommentare

MaxTech 800 Bedienungsanleitung Seite 18