MaxTech 800 Bedienungsanleitung PDF herunterladen (Seite 17)

866.4.Maxtec www.maxtecinc.com 11

CAL Err hi: SENSOR VOLTAGE TOO HIGH

• Repeat calibration routine as described in this manual. If unit repeats this error

more than three (3) times, contact Customer Service.

CAL Err Bat: BATTERY VOLTAGE TOO LOW TO RECALIBRATE

• Replace batteries.

5.0 CHANGING THE BATTERIES

8 9

Turn off analyzer.

Remove battery pack

from rear wall of cavity.

Use caution with wires.

Turn on analyzer to

verify power.

Use screwdriver to

remove four (4) screws

in back of device.

Remove two (2)

depleted batteries.

Reattach battery pack

to rear wall of cavity. Use

caution to not pinch wires

between cover and body of

device.

Pull front cover off

away from unit.

Ensure correct

orientation and install

two (2) new batteries.

Re-attach front cover

with four (4) screws.

1 2 ... 12 13 14 15 16 17 18 19 20 21

Keine Kommentare

MaxTech 800 Bedienungsanleitung Seite 17