Maxtech Transceiver Bedienungsanleitung PDF herunterladen (Seite 11)

Power Switch

PORT 1 / PORT 2 / Status LED

Keypad

Controls

Power Switch

• TRANSMIT Unit is powered on in

TRANSMITTER (TX) mode

• RECEIVE Unit is powered on in

RECEIVER (RX) mode

• OFF Unit is powered OFF

Keypad

• A B C D L Selects Q uad-T riggering Zones

and Local. Also used in menu

navigation and numeric entry

• TEST Triggers MultiMAX. Press to test

operation or to trigger remote units

and/or attached cameras/flashes

• (Back Light) Illuminates LCD and

keypad. Hold down for key lock

• ~/MENU Enters or exits menu system.

Stores numbers in numeric entry

•  (Up / Down) Selects channels.

Also used in numeric entry

PORT 1 / PORT 2

• CAMERA / PORT 1 =

• Input from cam era sync terminal,

external trigger button, Flash

Confirmation Cable, or other device

• Output to camera motor drive, flash, or

other device

• FLASH / PORT 2 =

• Output to flash, camera motor drive, or

other device

Status LED

Displays the following information:

• Blinking every few seconds = power on, ready for trigger

• Blinking in sync with trigger = normal triggering

• Steady =

• continuously triggered from radio, hot shoe, or PORT 1

• performing delay or contact time

• Slow blink every second = performing Intervalometer or Multi-pop function

• Dark = power off or poor battery condition

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 54 55

Keine Kommentare

Maxtech Transceiver Bedienungsanleitung Seite 11