MaxTech PCN2000 Series Bedienungsanleitung PDF herunterladen (Seite 32)

238 ZENworks for Desktops 3.2 Administration Guide

Novell Confidential Manual (99a) 11 September 2003

Using the Imaging Server

In most environments, the imaging server starts automatically when you reboot the server after

installing ZfD. With NDS eDirectory

8.5 on Windows, you must start the imaging server

manually as follows: from the folder where NDS is installed, double-click NDSCONS.EXE >

select the IMGSRV.DLM service > click Start. You might also want to click Startup to configure

the service to start automatically each time the server reboots.

Once the imaging server has started, you can view information about the status and results of the

imaging requests that it has received from imaging clients. A statistical summary of these requests

is shown on the server console (NetWare) or in a window accessible from the system tray

(Windows). The statistics shown on this screen are explained below. All statistics are reset to zero

if you restart the imaging server.

Imaging Server Log (ZIMGLOG.XML)

ZIMGLOG.XML is a chronological record of all the imaging requests that have been received by

the imaging server since it was installed and first started, including requests merely to log

information about imaging operations serviced elsewhere. For each imaging request, the imaging

server logs information such as the source, type, date/time, and results of the request.

ZIMGLOG.XML is created on a NetWare server in SYS:\SYSTEM or on a Windows server at the

root of the drive where NDS is installed (such as C:\).

Statistic Specifies

Update Requests The number of imaging requests of any kind that have been received by the

imaging server since it was started. This includes requests that failed, were

denied, or were referred to other imaging servers (see Client Referrals below).

Information about each of these requests, such as the source, type, date/time,

and results, is logged on the imaging server as explained in “Imaging Server

Log (ZIMGLOG.XML)” on page 238.

Images Sent The number of images that the imaging server has sent to imaging clients since

the imaging server was started. This includes only images that were retrieved

from this imaging server. See Client Referrals below for more information.

Images Received The number of new images that have been received and stored on the imaging

server since it was started. This includes images that were received through

client referrals as explained below.

Client Referrals The number of client requests that have been referred (redirected) by the

imaging server to other imaging servers since this imaging server was started.

Such referrals are made only when the client is running in auto-imaging mode

and the imaging server determines from NDS that the image to be created or

retrieved is on a different imaging server.

IMPORTANT: If a client is running in manual imaging mode and it requests to

store or retrieve an image on a different imaging server, the request is denied

and an error is returned to the client. Referrals are currently supported only

when the client is running in auto-imaging mode.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare

MaxTech PCN2000 Series Bedienungsanleitung Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung MaxTech PCN2000 Series