Maxtech xpvs336i Bedienungsanleitung PDF herunterladen (Seite 15)

+FPTS= Page Transfer Status

+FREV? Identify Revision

+FSPL Enable polling

+FTSI: Report the Transmit Station ID

3.8 Voice Commands

#BDR Select Baud Rate

#CID Enable Caller ID detection and reporting

format

#CLS Select Data, Fax or Voice/Audio

#MDL? Identify Model

#MFR? Identify Manufacturer

#REV? Identify Revision Level

#TL Audio output transmit level

#VBQ? Query Buffer Size

#VBS Bits per sample (ADPCM or PCM)

#VBT Beep Tone Timer

#VCI? Identify Compression Method

#VLS Voice line select

#VRA Ringback goes away timer

#VRN Ringback never came timer

#VRX Voice Receive Mode

#VSDB Silence deletion tuner

#VSK Buffer skid setting

#VSP Silence detection period

#VSR Sampling rate selection

#VSS Silence deletion tuner

#VTD DTMF tone reporting capability

#VTM Enable timing mark placement

#VTS Generate tone signals

#VTX Voice transmit mode

Section Four - S Registers

Your modem has 41 registers, designated S0

through S95. Table 4-1 shows the registers, their func-

tions, and their default values. Some registers can have

their values changed by commands. If you use a com-

mand to change a register value, the command remains

in effect until you turn off or reset your modem. Your

modem then reverts to the operating characteristics

specified in its non-volatile memory. Refer to Section 3

for information on how to use the AT commands to

manipulate the S registers.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

Maxtech xpvs336i Bedienungsanleitung Seite 15